<h2>Core features</h2>

<ul>
	<li>Optional see-through cover enhances safety with IP20 finger-safe protection, lockout/tagout capability and open circuit indication</li>
	<li>Available in 1-, 2- and 3-pole configurations to meet stocking requirements</li>
	<li>DIN-Rail and panel mount versatility allows one product to be used for multiple applications without incurring additional inventory cost</li>
</ul>

Bussmann series Class J fuse blocks and holders

Bussmann series Class H(K) fuse blocks and holders

Bussmann series Class H Fuses

Bussmann series Class G fuse blocks and holders

Bussmann series Class CF fuse blocks and holders

Bussmann series Class CC fuse blocks and holders

Bussmann series CCP disconnect switches

The revolutionary Bussmann&trade; series CCP with&nbsp;<a href="https://www.eaton.com/us/en-us/catalog/fuses-and-fuse-holders/bussmann-series-class-cf-fuses.html" target="_blank">CUBEFuse</a>&trade; is a fused branch circuit disconnect that requires up to 69% less space with ratings up to 400A.&nbsp; The CCP with CUBEFuse simplifies selective coordination and allows for isolation of individual branch circuit loads for safe work practices.

Terminal Block Accessories - Marking Tags

Terminal Block Accessories - Partition & Seperator Plates

Terminal Block Accessories - End Plates

Terminal Block Accessories - End Clamps / End Stops

Terminal Block Accessories - Din Rails

Panel Mount Terminal Block

CM series Terminal Blocks have a side wire entry configuration. These blocks are an excellent solution for extremely compact wiring applications. The Terminal Blocks are &quot;modular&quot; and can be stacked to form multipole assemblies. The stacked assemblies can be mounted on the panel surface using an End Plate at one end only. These Terminal Blocks are perfect solution for industries like Control Transformer, Elevators, Junction Boxes and applications with limited wiring space. CSCP2.5T &amp; CSCP2.5T2 Terminal Blocks have top wire entry. Jumpers can be easily inserted by using Spring Clamp Actuator tool SCA2.5. The CXCP2.5/4 Terminal Block has the same profile as the CSCP2.5T terminals and can be stacked together with them. The CXCP2.5/4 terminals can be mounted on standard DIN Rails. The terminals with &amp; IECEx approval can be used in potentially explosive atmosphere

Electronic Components

These are electronic series spring clamp double level Terminal Blocks with built in diodes and LED. The built in diode acts as a free wheeling diode which is connected across the inductive load such as relay coils, solenoid valves, contactor coils to eliminate or suppress sudden voltage spike which appears across the load when its supply voltage is removed. CXDL2.5(E)LD1 Terminal Block has a built in LED circuit for online indication. CX2.5/4(E)D1 is specially designed 4 wire spring clamp Terminal Block with a built in diode. This Terminal has a built in 1N4007 diode for reverse polarity protection and also allows uni directional flow of current.

Fuse

4 Level Marshalling Terminal Blocks

8 Level Marshalling Terminal Blocks

Disconnect & Test Terminal Blocks

CPDLK series terminals are double level disconnect Terminal Blocks. In these Terminal Blocks disconnection is achieved by opening the insulated knife (blade) contact. The disconnecting knife is appropriately colour coded to ensure error free disconnection of the correct circuit. CPDLK2.5 Terminal Blocks offer disconnection separately for both top and bottom levels. CPDLK2.5(I.S) Terminal Block is internally shorted, offering single potential for all 4 connection points. CPDLKFT2.5 is double level Terminal Block with a disconnecting lever on the top level and a feed through system on the bottom level. CPDLKFT2.5(I.S) offer similar configuration with top and bottom level internally shorted. Alternate and continuous bridging can be done with standard pluggable jumpers.

Sensor and actuator Terminal Blocks

Push In Earthing Terminal Blocks

CPG series are compact Push-In type earthing Terminal Blocks with specially designed alloy feet which help in achieving very low contact resistance and vibration proof grounding with the DIN rails. They are Green-Yellow colour coded as per industry standards. Cross connection of these Terminal Blocks can be done using insulated pluggable jumpers. Multi connect 3 wire &amp; 4 wire terminals eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block.

Multiple Level

CP3L2.5 is three level feed through Terminal Block. This is a practical solution for creating high density wiring circuits. CP3L2.5(I.S) is a three level internally shorted version and is an ideal choice for distribution circuits. CP3LG2.5 has 2 levels of feed through function with a grounding feet on the third level. In CP3LG2.5(I.S) all three levels are internally shorted to the ground contact. CP4LG2.5 is 3 level feed through Terminal Block with a grounding feet on the fourth level. This is suitable for three phase wire connection applications.

Spring Clamp Feed Through Terminal Blocks

CP series multi connect 3 wire &amp; 4 wire Push-In type Terminal Blocks are used to eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block

Bussmann series British Standard IEC fuses

125AXTN2

Eaton Industrial Switch &amp; Fuse Gear Exel/Glasgow LV systems Switch- &amp; Controlgear Enclosure

30KXTNC2F

15AXD2

101GN

15KXSC2F

103GN

404G

61GN

60AXD2

60KXDC2F

15KXDC2F

204G

CI-K2-PKZ0-NA-GRV

Eaton Moeller&reg; series CI-K Insulated enclosure

CI-K2-PKZ0-NA

Eaton Moeller&reg; series CI-K Accessory Insulated enclosure

CI-K2-PKZ0-NA-GV

CI-K2-PKZ0-NA-G

CI-K4-PKZ4-NA-GR

&nbsp;

Eaton Moeller&reg; series CI-K Insulated enclosure

CI-K2-PKZ0-NA-GR

4CO (QPDT) Industrial Purpose Relay Socket

2CO (DPDT) Industrial Purpose Relay Socket

2CO (DPDT) General Purpose Relay Socket

1CO (SPDT) General Purpose Relay Socket

2CO (DPDT) Industrial Electromechanical Relay With Test Button

2CO (DPDT) Industrial Electromechanical Relay

2CO (DPDT) General Purpose Electromechanical Relay

1CO (SPDT) General Purpose Electromechanical Relay

ECAP 35/15

End Caps help to secure the Din Rails. These End Clamps are designed to fix on DIN 35-15 rails. The Polyamide series End Cap have suitable recesses to accommodate DIn Rails.

CA502

End Clamps help to secure the entire Terminal Block assembly on the DIN Rail. End Clamps should be fixed on both sides of the Terminal Block assemblies. These End Clamps are designed to fix on DIN 32, DIN 35 and DIN 15 rails. The Polyamide series End Clamps have suitable recesses to accommodate a group marker holder and marking tags for group identification

CA302

End Clamps help to secure the entire Terminal Block assembly on the DIN Rail. End Clamps should be fixed on both sides of the Terminal Block assemblies. These End Clamps are designed to fix on DIN 32, DIN 35 and DIN 15 rails. The Polyamide series End Clamps have suitable recesses to accommodate a group marker holder and marking tags for group identification. The steel parts are Zinc plated and Chromate passivated.

CA104

<table>
	<tbody>
		<tr>
			<td>
			End Clamps help to secure the entire Terminal Block assembly on the DIN Rail. End Clamps should be fixed on both sides of the Terminal Block assemblies. These End Clamps are designed to fix on DIN 32, DIN 35 and DIN 15 rails. The Polyamide series End Clamps have suitable recesses to accommodate a group marker holder and marking tags for group identification.
			</td>
		</tr>
	</tbody>
</table>

CA103

End Clamps help to secure the entire Terminal Block assembly on the DIN Rail. End Clamps should be fixed on both sides of the Terminal Block assemblies. These End Clamps are designed to fix on DIN 32, DIN 35 and DIN 15 rails.

CA102

End Clamps helps to secure the entire Terminal Block assembly on the Din Rail. End Clamps should be fixed on both sides of the Terminal Block assemblies. These End Clamps are designed to fix on DIN 32, DIN 35 and DIN 15 rails.&nbsp;

CA701-AL

<table>
	<tbody>
		<tr>
			<td>
			Aluminium Din Rail for mounting Terminal Blocks. Most of Connectwell&#39;s Terminal Blocks are designed to be mounted on Din Rails (Channels) that can be fixed easily on panel boards and other equipment.
			</td>
		</tr>
	</tbody>
</table>

CA701

CA601

CA501

CSS480/24/20

20A,480W Single Phase Din Rail Mountable Switch Mode Power Supply

PSS480/24/20

20A,480W Single Phase Din Rail Mountable Switching Power Supplies

PSS300/24/12.5

12.5A,300W Single Phase Din Rail Mountable Switching Power Supplies

CSS240/24/10

10A,240W Single Phase Din Rail Mountable Switch Mode Power Supply

PSS240/24/10

10A,240W Single Phase Din Rail Mountable Switching Power Supplies

CSS120/24/5

5A,120W Single Phase Din Rail Mountable Switching Power Supplies

PSS100/24/4.2

4.2A,100W Single Phase Din Rail Mountable Switching Power Supplies

CSS60/24/2.5

2.5A,60W Single Phase Din Rail Mountable Switching Power Supplies

CDINSD : Din Rail Mounting Socket & Switch

CDINSUK : Din Rail Mounting Socket & Switch

CDINS16 : Din Rail Mounting Socket & Switch

CDINS6 : Din Rail Mounting Socket & Switch

Tinned Copper Bus Bar

Tin-plated copper busbar and copper bar helps upgrade design and provide the best quality for switchgears, switchboards, electrical panels, power transformers and busducts

Products

GI Conduits

RR Global

Cable Management System

Similar Products

Cable Lugs

RR Global

Cable Management System

Cable Gland

RR Global

Cable Management System

Tie Base

RR Global

Cable Management System

Cable Ties

RR Global

Cable Management System